1. Terms

By accessing this web site, you are agreeing to be bound by these web site Terms and Conditions of Use, all applicable laws and regulations, and agree that you are responsible for compliance with any applicable local laws. If you do not agree with any of these terms, you are prohibited from using or accessing this site. The materials contained in this web site are protected by applicable copyright and trade mark law.

2. Use License

Permission is granted to temporarily download one copy of the materials (information or software) on SuperAlloy International Co. Ltd.’s web site for personal, non-commercial transitory viewing only.

This is the grant of a license, not a transfer of title, and under this license you may not:
modify or copy the materials;
use the materials for any commercial purpose, or for any public display (commercial or non-commercial);
attempt to decompile or reverse engineer any software contained on SuperAlloy International Co. Ltd.’s web site;
remove any copyright or other proprietary notations from the materials; or
transfer the materials to another person or “mirror” the materials on any other server.

This license shall automatically terminate if you violate any of these restrictions and may be terminated by SuperAlloy International Co. Ltd. at any time. Upon terminating your viewing of these materials or upon the termination of this license, you must destroy any downloaded materials in your possession whether in electronic or printed format.

3. Disclaimer

The materials on SuperAlloy International Co. Ltd.’s web site are provided “as is”. SuperAlloy International Co. Ltd. makes no warranties, expressed or implied, and hereby disclaims and negates all other warranties, including without limitation, implied warranties or conditions of merchantability, fitness for a particular purpose, or non-infringement of intellectual property or other violation of rights. Further, SuperAlloy International Co. Ltd. does not warrant or make any representations concerning the accuracy, likely results, or reliability of the use of the materials on its Internet web site or otherwise relating to such materials or on any sites linked to this site.

4. Limitations

In no event shall SuperAlloy International Co. Ltd. or its suppliers be liable for any damages (including, without limitation, damages for loss of data or profit, or due to business interruption,) arising out of the use or inability to use the materials on SuperAlloy International Co. Ltd.’s Internet site, even if SuperAlloy International Co.Ltd. or a SuperAlloy International Co. Ltd. authorized representative has been notified orally or in writing of the possibility of such damage. Because some jurisdictions do not allow limitations on implied warranties, or limitations of liability for consequential or incidental damages, these limitations may not apply to you.

5. Revisions and Errata

The materials appearing on SuperAlloy International Co. Ltd.’s web site could include technical, typographical, or photographic errors. SuperAlloy International Co. Ltd. does not warrant that any of the materials on its web site are accurate, complete, or current. SuperAlloy International Co. Ltd. may make changes to the materials contained on its web site at any time without notice. SuperAlloy International Co. Ltd. does not, however, make any commitment to update the materials.

6. Links

SuperAlloy International Co. Ltd. has not reviewed all of the sites linked to its Internet web site and is not responsible for the contents of any such linked site. The inclusion of any link does not imply endorsement by SuperAlloy International Co. Ltd. of the site. Use of any such linked web site is at the user’s own risk.

7. Site Terms of Use Modifications

SuperAlloy International Co. Ltd. may revise these terms of use for its web site at any time without notice. By using this web site you are agreeing to be bound by the then current version of these Terms and Conditions of Use.

8. Governing Law

Any claim relating to SuperAlloy International Co. Ltd.’s web site shall be governed by the laws of the State of Coventry without regard to its conflict of law provisions.

General Terms and Conditions applicable to Use of a Web Site.

 

您正離開本站!

您現在欲前往的網站並非 巧新科技工業股份有限公司(本公司) 所有,而是各由其所屬之第三人所有、操縱及控制。 本站對第三人所有之網站亦無任何操縱或控制的權限。 本站上之網路指示連結功能僅為提供您的便利而設。本站及本公司對該第三人所有之網站上的內容品質、效力、正確性、完整性、即時性、適法性,及該網站上之任何言論或聯結不負任何責任。 本站及本公司亦無調查、監視第三人所有的網站上的內容之品質、效力、正確性、完整性、即時性、適法性的義務。本站上之網路指示連結功能無論於任何情形下,不能解釋成為對任何第三人網站的保證、背書、推薦或相類的聲明。 本站及本公司特於此明確宣示對於任何第三人所有網站之內容的品質、效力、正確性、完整性、即時性及適法性不負任何明示或默示的擔保責任。

2024年度董事會運作情形資訊

一、董事任期:自2023年11月13日至2026年11月12日止。
二、董事會主席黃聰榮先生於2024年度共召開七次會議,董事出席情形如下表:

職稱

Title

姓名

Name

實際出(列)席

次數

Attendance in Person

委託出席次數

By Proxy

實際出(列)席率(%)

Attendance Rate in Person (%)

備註

Notes

董事長

Chairperson

黃聰榮

Mr. HUANG Tsung-Jung

7

0

100

 

董事

Director

永名投資(股)公司

代表人:張秋月

Yung-Ming Investment Co., Ltd.

Ms. CHANG  Qiuyue                 

7

0

100

 

董事

Director

正億企管顧問(股)有限公司

代表人:王順忠

Representative of Jeng-Yi Business Management Consultant Co., Ltd.

Mr. WANG Shun-Zhong                     

7

0

100

 

董事

Director

魏隆誠

WEI Long-Cheng

70100 

董事

Director

施茂林

Mr. SHIH Mao-Lin

61100 

董事

Director

劉克昌

Mr. LIU Ke-Chang

70100 

獨立董事

Independent Director

鄭丁旺

Mr. CHENG Ding-Wang

 7 0 100

 

獨立董事

Independent Director

柳婉郁

LIOU Wan-Yu

 7 0 100 

獨立董事

Independent Director

程明修

CHERNG Ming-Shiou

 5 0 71.43 

獨立董事

Independent Director

陳文宗

CHEN Wun-Zong

 7 100 
      
      

 

 

    

 

 

    

 

 

    

其他應記載事項:

重要決議如下:

會議日期

屆次

重要決議

113.03.07

第15屆

第3次

董事會

1.重要財務業務報告。

2.報告內部稽核執行情形。

3.報告衍生性商品評估報告。

4.通過修正2024年第一季營收預算。

5.通過本公司代理總經理真除轉正。

6.通過辦理現金增資發行新股以供本公司股票上市前公開承銷。

7.通過本公司112年度營業報告書、個體財務報告及合併財務報告。

8.通過本公司112年度盈餘分配。

9.通過本公司112年內部控制制度聲明書。

10.通過本公司112年度簽證會計師獨立性及績效評估。

11.通過本公司113年簽證會計師之委任及報酬。

12.通過預先核准簽證會計師、其事務所及事務所關係企業向本公司及子公司提供非認證服務。

13.通過重新訂定內部控制制度總則。

14.通過修正資金貸與他人處理程序。

15.通過修正印鑑使用管理規定。

16.通過修正董事會議事辦法。

17.通過修正審計委員會組織規程。

18.通過訂定風險管理辦法。

19.通過本公司112年度員工酬勞及董事酬勞分配暨經營層提撥。

20.通過113年第1次庫藏股轉讓經理人。

21.通過初次上市前現金增資員工認股辦法及內部人認股名單。

22.通過訂定民國113年股東常會開會日期、議程及股東提案權之受理期間。

23.通過永續發展委員會組織規程修正。

113.05.07

第15屆

第4次

董事會

1.重要財務業務報告。

2.報告內部稽核執行情形。

3.報告衍生性商品評估報告。

4.通過本公司113年第一季合併財務報告。

5.通過委任柳婉郁獨立董事及鄭丁旺獨立董事為永續發展委員會委員。

6.通過本公司2023年永續報告書編制結果報告。

7.通過停止巧新科技工業股份有限公司員工福利儲蓄會。

8.通過辦理員工持股信託業務。

9.通過修正盈餘分配表。

113.08.08

第15屆

第5次

董事會

1.重要財務業務報告。

2.報告內部稽核執行情形。

3.報告衍生性商品評估報告。

4.報告投資有價證券執行情形。

5.通過本公司113年上半年合併財務報告。

6.通過修正「巧新科技工業股份有限公司員工持股信託實施辦法」第三條第一項案。

7.通過修正「巧新科技工業股份有限公司董事、獨立董事、功能性委員暨經理人報酬及酬勞給付辦法」第三條第二項第3點。

113.10.01

第15屆

第6次

董事會

1.通過成立子公司建置熔煉廠,從事鋁合金代工與銷售業務。

2.報告LCTec GmbH(舊名:SAINT)於110年12月向德國仲裁協會(DIS)聲請仲裁結果。

113.11.05

第15屆

第7次

董事會

1.重要財務業務報告。

2.報告內部稽核執行情形。

3.報告衍生性商品評估報告。

4.報告投資有價證券執行情形。

5.通過本公司113年第三季合併財務報告。

113.12.26

第15屆

第8次

董事會

1.重要財務業務報告。

2.報告內部稽核執行情形。

3.報告衍生性商品評估暨投資有價證券執行情形。

4.董事暨重要職員責任險續保報告。

5.法遵情形報告。

6.報告依IFRS永續揭露準則編製永續資訊執行進度。

7.通過114年度預算。

8.通過114年度資本支出。

9.通過114年度稽核計畫。

10.通過訂定永續資訊管理作業規範。

11.通過不動產、廠房設備循環核決權限表修正。

12.通過董事及獨立董事114年度績效評估標準。

13.通過經理人114年度績效評估標準。

14.通過113年度執行業務董事及經理人年終獎金。

15.通過本公司買回股份轉讓員工辦法。

16.通過本公司擬以庫藏股方式買回股份轉讓予員工。

   

Hyperlinked-Disclaimer

You are now leaving our web site. The web site you wish to link to is owned or operated by an entity other than SuperAlloy Industrial Co., Ltd.. We do not control this third party web site. We are providing this link for your convenience only and we are not responsible for the availability of or the content located on or through this third party web site, the accuracy, completeness, timeliness, or legality of any information contained in this third party web site, and any opinions expressed therein, nor for any link contained in this third party web site. This third party web site is not investigated, monitored, or checked for accuracy, completeness, timeliness, or legality, by SuperAlloy Industrial Co., Ltd.. The link from our web site to this third party web site does not imply that we approve of, endorse, or recommend this third party web site. We expressly disclaim all warranties, express or implied, as to the accuracy, legality, reliability, timeliness, quality, or validity of any content on this third party web site.